Getting Help From Canon - Canon PIXMA MP620 Setup

5
1
6
1
a. Wait for a while, then select
Canon MP620 series
b. Click Add
The alphanumeric string after Canon
MP620 series is the machine's MAC
address.
If the machine has not been detected,
make sure of the following.
– The machine is turned on.
– The firewall function of any security
software is turned off.
– Wireless LAN Connection: The
computer is connected to the access
point.
– The machine is not set to use access
control (MAC address filtering).
Monday - Friday (excluding holidays), during the warranty period
20081010-US-Web-V01
Measure Wireless Performance
On the Connection Performance
Measurement dialog box, click
Next .
Complete the Setup
a. On the Canon IJ Network
b. Click Apply to use the

Getting Help from Canon

Visit www.canontechsupport.com
Call 1-800-828-4040
2
2
Scanner Selector screen
select Canon MP620
series Network in TWAIN
Data Source Name and the
MAC address of the machine
in Network Device List
machine as a scanner
Proceed to page 56 of the Getting Started
Guide, "Loading Paper"
©CANON INC. 2008
Confirm the measurement results,
then click Finish .
E n s u r e t h a t i s d i s p l aye d i n
Connection performance between
the printer and the access point.
The Printer Setup Utility and Canon
IJ Network Scanner Selector will
start up.
To check whether the
new location is better,
click Remeasurement .
Measurement of the
communication status is
performed again.
3
a. Confirm that a check mark
is displayed
b. Click Exit to close the dialog
box
Apple, AirPort Extreme, Macintosh and Time Capsule are
trademarks of Apple, Inc., registered in the U.S. and other
countries.
PRINTED IN U.S.A.