Table of Contents
Advertisement
MAKING CAPPUCCINO
5. Place the recipient con-
taining the milk under
the steam wand (A11):
immerse the frother
and turn the dial to the
position.
9. Once the desired temperature is reached, turn the steam
knob off and wait till steam stops completely before re-
moving the milk pitcher
10. Pour the frothed milk into the cups containing the espresso
coffee prepared previously. The cappuccino is ready.
Sweeten to taste and if desired, sprinkle the froth with a
little cocoa powder.
Cleaning the steam wand
1. After every use, remove with
a soft damp cloth any milk
residues from the steam
wand. For perfect cleaning,
we recommend Eco Multi-
Clean: it ensures hygiene by
removing milk proteins and
fats and can be used to clean
the whole machine.
2. Use the steam for a deeper
cleaning.
3. Wait that the steam wand
cool down and open the hole
of the nozzle with the clean-
ing needle (C7).
5
6. To make the froth, put
the nozzle on the surface
of the milk and air will
catch by the mixing of
milk and steam.
6
7. Keep the steam nozzle just
on the surface, careful not
to make big bubbles by
letting too much air in.
Please note:
•
To prepare more than one cappuccino, first make all the
coffees then at the end prepare the frothed milk for all
the cappuccinos.
•
To exit the steam function, press any button. The
and
lights flash to indicate that the Cooling Cycle
is required.
• You should not deliver steam for more
than 60 seconds.
6.1 Cooling Cycle
After having used the steam wand and exited the steam func-
tion, the two lights
chine will flash simultaneously indicating that the boiler needs
to be cooled off in order to reach the precise espresso brewing
temperature. Simply proceed as follows:
1
•
place a container under the
cappuccino maker;
1. open the steam dial to deli-
ver steam and hot water: the
light flashes;
2
1. when both lights (
and
) flash the boiler
is cool: close the steam dial.
(when the boiler is cool, the
pump stops operating and
no more water is delivered).
3
The coffee maker is now ready for
use.
8
7
8. Insert the steam nozzle
just under the milk: this
create a vortex.
and
on the front of the ma-
8
1
2
Advertisement
Table of Contents
