Table of Contents
Advertisement
10. DEFAULT VALUES (RESET)
This resets all menu settings and programmed quantities back
to the default values.
To reset the default values, proceed as follows:
1. Position the steam spout over the drip tray;
2. Enter the settings menu;
3. Turn the steam dial to the
4. Press the
button. The three lights flash simultaneou-
sly to confirm that the original settings have been restored.
5. The
and
dial must be closed again (○symbol).
When the steam dial has been closed, the machine is ready for
use.
11. CLEANING THE MACHINE
The following parts of the machine must be hand cleaned
regularly:
•
the drip tray (A9)
•
the coffee filters (C2), (C3) and (C4);
•
the coffee outlet (A5);
•
the water tank (A3);
•
the steam wand (A11) as described in section ""Cleaning
the steam wand";
Important!
•
None of the components or accessories is dishwasher safe.
•
Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine.
•
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
•
If the machine is not used for more than one week, before
using it again, we strongly recommend you perform a rinse
cycle as described in section "2. Preparing your machine for
first use".
Danger!
•
While cle aning, never immerse the coffee maker in water. It
is an electrical machine.
•
Before cleaning the outside of the machine, turn it off, un-
plug from the main socket and allow to cool.
11.1 Cleaning the drip tray
Important!
The drip tray is fitted with a level indicator (red) showing the
level of water it contains. Before the indicator protrudes from
the cup tray (fig. 1), the drip tray must be emptied and cleaned
otherwise the water may overflow the edge and damage the
machine, the surface it rests on or the surrounding area.
position;
lights flash to indicate that the steam
1. Remove the drip tray (A9) (fig. 2).
2. Remove the cup tray (A7), empty the water and clean the
drip tray with a cloth, then reassemble the drip tray. Extract
the mugs or glasses tray (A10), clean with water, dry and
put back in the machine;
3. Put the drip tray back in place.
11.2 Cleaning the coffee filters
The coffee filters are designed to obtain the best possible coffee
froth. For best results, the filters must always be clean and free
from all coffee residues.
After using the appliance, always rinse the filters under abun-
dant running water (fig. 3), pushing the perforated filter to
make sure it is always correctly inserted in its housing (fig.4);
make sure the hole underneath (shown in fig. 5) is free from all
residues.
If still dirty, and in any case always at least once a month, clean
the coffee filters thoroughly:
1. Extract the perforated filter by pulling the tab (fig. 6).
11
1
3
5
2
4
Advertisement
Table of Contents
