LG VR9647PS Manual page 20

Remaining Battery Charge Indicator
The Battery level is indicated on the Status Display, as follows.
• If recharging is in progress, the Battery Level indicator flashes showing the battery charge status level.
• If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.
• Upon the need for recharging, only the first level of the Battery charge level indicator will be on and flashing.
Charging is required
※ If Robot Cleaner goes back to the Home Station, in need of a charge during
the cleaning mode, the Cleaning mode indicator will continue to flash during
charging to indicate that cleaning was disrupted as the battery required
charging.
- When the 'Clean Mode' lamp continues to flash after recharging is
complete, Robot Cleaner will then resume cleaning the areas which were
not previously completed.
- Pressing the 'Start' button on the Remote Controller or 'Start/Stop' button
on main unit whilst it is recharging, with the 'Clean Mode' lamp flashing,
will also manually force the Robot Cleaner to find and clean the uncovered
areas.
- Pressing the "Start" button on the remote control or the "Start/Stop" button
on the Robot Cleaner after the Charging has completed will make the Robot
Cleaner start to clean from the beginning again.
If the Battery is Not Charging
Check 1:
If the battery is not charging even when the Robot Cleaner is
attached to the home station, check the following items.
- Turn the power switch on the rear-left of the Robot Cleaner
off once and then on again.
- Check the power lamp of the home station.
- Wipe the terminals on the home station with a dry cloth.
(p50)
HOW TO CHARGE THE BATTERy
Flickering
Middle
Low
High
The status indicators show the
different pending conditions
during charging mode.
In the case of no existing area
to be cleaned after charging.
In the case of an existing area that the
Robot Cleaner will resume cleaning
when charging has completed.
(flashing Cleaning indicator)
Power lamp
Charge terminal
19