English Contents Dear Customer, MultiSystem Guide to Using this Manual Thank you for choosing a quality engineered STIHL product. Safety Precautions and Working Techniques It has been built using modern Using the Unit production techniques and comprehensive quality assurance. Approved MultiEngines...
Only use attachments and accessories reference. that are explicitly approved for this power tool model by STIHL or are technically identical. If you have any questions in this respect, consult your dealer. MF-MM...
Page 5
By vehicle: When transporting in a STIHL recommends the use of genuine vehicle, properly secure your machine to STIHL replacement parts. They are prevent tipping over, damage and fuel specifically designed to match the spillage.
Page 6
(vehicles, window RL-MM aerator – important for safe control of the panes) – risk of property damage! MF-MM dethatcher machine – The correct engine idle speed is Swing the bike handle to the normal important to ensure that the attachment –...
Page 7
When working next to high scrub, After thoroughly cleaning, coat metal bushes and hedges, avoid harming surface of attachments with a corrosion animals! inhibitor. Be particularly alert and cautious when wearing hearing protection because your ability to hear warnings (shouts, alarms, etc.) is restricted. MF-MM...
MultiEngine instruction manuals. Have all other work performed by a servicing dealer. STIHL recommends that you have Operate the MultiEngine with MF-MM servicing and repair work carried out dethatcher in the forward direction only. exclusively by an authorized STIHL The attachments may only be rotate in servicing dealer.
Secure the handlebar in the normal Only use MultiEngines supplied by operating position. Removing Existing MultiTools STIHL or expressly approved by STIHL Start the engine. for use with the MultiTool. Work with the engine running at full This MultiTool may only be used in WARNING throttle.
Tighten the first screw moderately. – without a properly mounted deflector and snap it into position. extensions. Tighten the second screw – Mount the right-hand dethatcher in moderately. the same way. Tighten down first screw firmly. – Tighten down second screw firmly. – MF-MM...
Retract the wheels, if fitted – see Now follow the starting procedure chapter on "Wheels" in MultiEngine described in the MultiEngine instruction instruction manual. manual. Retract the spur, if fitted. Stopping the Engine See MultiEngine instruction manual. MF-MM...
Pull off the spring tines (3) and washers. Replace damaged spring tines. Fit spring tines and washers on the tubes until they are full. Fit the flange (2). Tighten down the screws (1) firmly. Mount the dethatcher – see "Mounting the MultiTool". MF-MM...
English servicing dealer. STIHL dealers are Minimize Wear and Avoid regularly given the opportunity to attend Damage training courses and are supplied with the necessary technical information. Observing the instructions in this manual and the MultiEngine manual helps If these maintenance operations are not...
English Main Parts Right-hand wheel Left-hand wheel Inner hitch pin, left Deflector extension, right Defflector extension, left Mud flap Outer hitch pin, left Spring tines MF-MM...
Take the product, REACH replacement parts which have been accessories and packaging to an approved by STIHL for this power tool or approved disposal site for environment- are technically identical. Only use high- friendly recycling. REACH is an EC regulation and stands...