System Event Log (Ga-6Lash Only) - Gigabyte GA-6LASH User Manual

Lga1150 socket motherboard for intel e3 series processors

Hide thumbs Also See for GA-6LASH:

Table of Contents

2-5-3 System Event Log (GA-6LASH Only)

Enabling/Disabling Options

SEL Components

Change this to enable or disable all features of System Event Logging during boot.

Options available: Enabled/Disabled. Default setting is Disabled.

Erasing Settings

Erasing SEL

Choose options for erasing Smbios Event Log Erasing is done prior to any logging activation during

reset.

Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No.

When SEL is Full

Choose options for reactions to a full System Event Log.

Options available: Do Nothing/Erase Immediately. Default setting is Do Nothing.

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted to legacy).

Options available: Disabled/Both/Error code/Progress code. Default setting is Both.

- 89 -

BIOS Setup

Table of Contents

Ga-6lasl