Table of Contents
Advertisement
Draft for Sony Ericsson Internal Use Only -Z712a PA1
2
If the contact has more than one
number, use
numbers. Select the number to add
the voice command to. Record a voice
command such as "John mobile".
3
Instructions appear. Wait for the tone
and say the command to record. The
voice command is played back to you,
if the recording quality is acceptable.
4
If the recording sounds OK to you
} No
Yes. If not
To record another voice command for
} New Voice Cmd. } Add
a contact
again and repeat steps 2-4 above.
Caller name
Hear your recorded contact name
when you receive a call from that
contact.
To turn the caller name on or off
} Settings }
the
Control } Play Caller
Voice dialing
Start voice dialing from standby using
the phone, a portable handsfree, a
Bluetooth headset or by saying your
magic word.
To voice dial from the phone
1
From standby, press and hold one of
the volume keys.
and
to view the
and repeat step 3.
} Voice
General
tab
Name.
2
Wait for the tone and say a recorded
name, for example "John mobile". The
name is played back to you and the
call is connected.
To voice dial with a handsfree
1
From standby, press and hold the
handsfree button, or press the
Bluetooth™ headset button.
2
Wait for the tone and say a recorded
}
name, for example "John mobile". The
name is played back to you and the
call is connected.
The magic word
Record and use a voice command as
a magic word to activate voice control
without pressing any keys. The magic
word can only be used with a wired
portable or vehicle handsfree.
Magic word is not supported by Blue-
tooth™ devices.
Choose a long, unusual word or phrase
that can easily be distinguished from
ordinary background speech.
Calling
27
Advertisement
Table of Contents
