Maintenance - LG WM2233HS Owner's Manual

MAINTENANCE

Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.
When disposing of the appliance, cut off the power cable, destroy the plug, and disable the door lock to prevent
young children from being trapped inside.
■ The water inlet filter
• " " error message will blink on the control panel when water does not enter the dispenser.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
We recommend cleaning it every few months.
1. Turn off the water tap.
3. Clean the filter using a hard
bristle brush.
■ The drain pump filter
•
The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
Drain, using the drain hose, before opening the pump filter to remove objects.
•
Allow the water to cool down before cleaning the drain pump filter.
1. Open the lower cover cap (
Turn the drain plug ( ) to pull
out the hose.
2. Unscrew the water inlet hose.
4. Tighten the inlet hose.
CAUTION
Be careful when draining if the water is hot.
). 2. Unplug the drain plug
allowing the water to flow out.
At this time use a vessel to
prevent water from flowing
onto the floor. When water does
not flow any more, turn the
pump filter
1
• IMPORTANT:
Use ONLY the inlet hoses
provided by LG with this laundry
product.
Aftermarket hoses are not
guaranteed to fit or function
correctly. Other hoses may
not tighten correctly and could
cause leaks. Subsequent
damage to product or property
will not be covered under the
terms of LG's warranty.
3. Remove any foreign objects from
,
the pump filter
turn the pump filter
and insert the drain plug
original place. Close the lower
cover cap .
open to the left.
3
2
. After cleaning,
clockwise
to the
1 7