Using Digital Multimedia Connectors; Usb Memory Connection; Connecting The Led Tv To A Pc - Salora 42LED7100C Operating Instructions Manual

Colour television with remote control
Table of Contents

Advertisement

Available languages

Available languages

Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using
the USB inputs of the TV. This feature allows you
to display/play JPG, MP3 and video files stored in
a USB stick.
It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW

USB Memory Connection

IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB device to the USB inputs of the TV. You can
connect two usb device to your TV by using the USB
inputs of the TV at the same time.
Note: It is possible certain types of hard disk drives
are not supported.
USB MEMORY
English - 42 -

Connecting the LED TV to a PC

For displaying your computer's screen image on your
LED TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LED TV. When the connection
is made, switch to PC source. See "Input selection"
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.
Audio inputs of the TV
PC audio cable
(not supplied)
Audio output of the PC
Note: If you connect a PC to the TV using HDMI
connection, radio interference may occur. Therefore
this type of connection is not recommended. You
should use VGA connection instead.
PC input of the TV
PC VGA cable
(not supplied)
Monitor output of the PC

Advertisement

Table of Contents
loading

Table of Contents