Table of Contents
Advertisement
Example:
Mode
3.3 Setting Home / Sleep / Away
mode
In order to optimize the building's energy ef-
ficiency, the control unit can be set with
3 various modes (Home, Sleep, Away), each
with a predefined temperature interval.
There are also 3 ways to define each mode's
intervention.
A. PROGRAMMING
The user can set up to 8 time settings, each
of which is defined by the following param-
eters:
− Activation time
− Mode type (Home, Sleep)
− Day or days of the week for which it
is active
For more information, please refer to the sec-
tion titled "Programming: Assigning the time
frames for the heating and cooling modes".
THU
Off
B. MANUAL SETTINGS
The user can modify the mode directly from
the screen. This setting will remain in effect
until changed by the user.
− In order to select the mode, press the
Home button repeatedly.
− The icon corresponding to the select-
ed mode will be displayed.
ICON
The heat pump operates in
Home mode and the Home set-
point is utilized.
The heat pump operates in
Sleep mode and the Sleep set-
point is utilized.
The heat pump operates in Away
mode and the Away setpoint is
utilized.
C. MODE BLOCK
The selected mode can be blocked for a peri-
od of time specified by the user. All the pro-
gramming will be ignored for the duration of
this time frame.
In order to set the mode block time frame
− Press and hold down the Home but-
ton for 2 seconds.
2 sec.
− The duration of the Home / Sleep /
Away period can be set in either hours
or days. In order to set the number of
hours / days, press the Up or Down
buttons.
9
CONTROL UNIT PROGRAMMING
DESCRIPTION
Advertisement
Table of Contents
