Riello NEXPOLAR Manual page 14

CONTROL UNIT PROGRAMMING
Modifying the programming
− To modify the programming, press the
Program button
− Upon accessing the menu, the user
will have the opportunity to modify
the first programming interval (ID).
Days of the week
− The first day of the week ("MON") will
begin to flash. Press the Up or Down
buttons to select "yes" or "no".
Example: Monday
DAY
MON
Status: "yes" or "no"
Press the Program button to confirm your se-
lection.
ID
14
− The next day ("TUE") will begin to
flash. At this point, select "yes" or
"no" again as previously described.
− After having set the last day of the
week, ("SUN"), the clock will begin to
flash.
− Press the Up or Down buttons to set
the start time
− Press the Program button to confirm
the start time.
− Once the start time has been set, the
home mode icon will begin to flash.
− Press the Up or Down buttons to set
the home mode.
− Press the Program button to confirm.
− The first day "MON" will begin to flash.
− Press and hold down the Program
button (ID=1) for 2 seconds to validate
the program.
− The second program will be displayed
(ID=2). To program it, repeat the oper-
ations described above.
2 sec.