Connecting A Macintosh Desktop Computer - Sanyo PLC-8810E Owner's Instruction Manual

Connecting a Macintosh desktop computer

COMPUTER
AUDIO
OUTPUT
AUDIO CABLE
(NOT PROVIDED)
AUDIO
INPUT
Set the slide switches as shown in the table below depending on
the RESOLUTION MODE that you want to use before you turn on
the projector and computer.
NOTE: The hook up should be done as per the above illustration. After hook up, turn on the projector, monitor,
computer, in that order.
(PROVIDED)
ADB
PORT INPUT
MOUSE CABLE
FOR ADB PORT
(PROVIDED)
CONTROL PORT
OUTPUT 1 or 2
COMPUTER
AUDIO INPUT
AUDIO MONITOR
OUTPUT
L
SPEAKER
OUT
MONITOR CABLE
(NOT PROVIDED)
COMPUTER
INPUT 1 or 2
Speaker (L) Speaker (R)
SW1 - SW6