Fisher-Price W9638 Quick Manual

• Please keep this instruction sheet for future
reference, as it contains important information.
• Requires two "AA" batteries (included)
for operation. Batteries included are for
demonstration purposes only.
• Adult assembly is required for battery
replacement. Required tool: Phillips
screwdriver (not included).
• Wipe the toy with a clean, damp cloth. Do
not immerse. This toy has no consumer
serviceable parts. Do not take apart.
• Start by inserting one of the end posts on the
rail into end slot in the base.
• Press near the bottom of the post to "snap"
in place.
• Repeat this procedure to "snap" the remaining
posts in place.
Hint: The rail is designed to break-away from the base.
Simply reassemble it using the assembly procedure.
• A plastic tab was attached to the toy for
in-store demonstration purposes. While the
tab may have already been removed, check
the bottom of the toy to be sure. If a plastic
tab is still attached, pull and remove the tab.
Throw the plastic tab away.
For best performance, we recommend
replacing the batteries that came with this toy
with two, new "AA" (LR6) alkaline batteries.
• Locate the battery compartment door. Loosen
• Insert two "AA" (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
• When sounds or lights from this product
• If this product begins to operate erratically, you
• Slide the switch ON
• This toy will turn off after about one minute of
fi sher-price.com
the screw in the battery compartment door
with a Phillips screwdriver. Remove the
batteries and properly dispose of them.
tighten the screw. Do not over-tighten.
become faint or stop, it's time for an adult to
change the batteries.
may need to reset the electronics. Slide the
power switch off and back on.
inactivity. Press any button to restart!
W9638
1,5V x 2
"AA" (LR6)
or OFF .