Installer Quick Setup Guide - LG Zenith L20V54S Installation And Operating Manual, Warranty

Installer Quick Setup Guide

L20V54S PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000 FPGA 09F1
PTC V1.00.000 CPU V1.01.00
117 FACT DEFAULT
003 BAND/AFC
028 CH.OVERIDE
Mode Standard
Balance
Auto Volume
On
Sound
English
Multi-Track
Internal Speaker On
11:20 PM
Sep.11, 2006
Move OK Select
Mode Standard
Contrast
Color Temperature
Brightness
Screen Format
Picture
Sharpness
Noise Reduction
Color
Film Mode
Tint
11:20 PM
Sep.11, 2006
Move OK Select
P A G E 6 0
Quick Setup Guide
for Integrated Master TVs
See table of contents for more information.
VIDEO
AC IN HDMI
IN
AUDIO IN VIDEO IN
AC Power
Cord
000
00X
00X
001
G
Menu Back
G
100
79
65
70
0
Back
Menu
Antenna
Auto Program
Channel Label
Channel
Channel List
Fine Tune
Signal Strength
--:-- --
--.-- ----
RS-232C UPDATE RS-232C FUTURE
SELECT USE
CONTROL NORMAL
(DTV)
Setup Instructions for Making a Master TV
1. Connect TV to signal source, connect power cord and turn TV power on.
2. Enter the TV installer menu.
*Note: If this is not a new setup, set Installer item 117 to 001 and press Enter to
reset TV to default condition.
• Set Tuning Band.
Set Installer menu item 003 BAND/AFC to CATV: 001, Broadcast: 000 etc.
• If necessary, set Installer menu item 028 CH OVERIDE to 001.
In addition, set any other installer items as required of your system.
Exit Installer menu.
3. Access the Master TV menus and set the clonable options on the menus to the
desired configurations. Refer to the Clonable Menu Features Chart for the TV.
(Picture, Sound, Time etc.)
4. Do a Channel Search; run Auto Program. (aka EZ Scan.)
5. Enter the Channel Edit menu and delete channels per your requirements.
6. Enter the Channel Label menu and assign ICONs to the channels.
*Note: You can add Channel ICONStypically network logos like ABC, NBC, PBS etc. in
this step. Or, in Step 8, add Channel ICONSor custom text labels for channels which no
Icons are available for.
7. Transfer the TV setup. After all menu options and features are set to your
requirements, enter the installer menu. Press '2', '5', '5', 'MENU' to start the transfer
of the TV's setup to the PTC.
After the transfer is complete, the system will exit the Installer menu.
8. Set any Channel Labels as needed.
a. Enter Installer menu.
b. Press '2', '5', '4', 'MENU' to enter the menu. In this menu edit the assigned
channel Icons, assign custom text labels for channels and assign labels for active
Aux sources. Press 'Menu' to exit.
9. Enter the Installer menu. Set item 028 Ch Overide to 000 and exit menu.
028 CH.OVERIDE
DIGITAL 19-3
G
Move OK Select Menu Back
SPEAKER SWITCH
PILLOW NORMAL
SPEAKER SPEAKER
Antenna
Wall Jack
RF Coaxial Wire
(75ohm)
000
ANALOG 2
MONO STEREO SAP
WXYZ
MONO
WXYZ
Antenna
Auto Program
Channel Label
Channel
Channel List
Fine Tune
Signal Strength
--:-- --
--.-- ----
Menu Back
Searching ...
ANALOG34 added
30