L20V54S Aux Input Configuration/Troubleshooting - LG Zenith L20V54S Installation And Operating Manual, Warranty

L20V54S Aux Input Configuration / Troubleshooting
L20V54S Aux Input Configuration
DIRECT ACCESS
Tuning
OLD_OCV OLD_OCV
Source Input
=0 =1
131 91 Video1(Rear)
133 93 DVI/HDMI1
Troubleshooting
Some quick and easy tips to resolving problems.
Symptoms Possible Cause(s)
Software Problems
TV not functioning Software lockup.
properly.
Software Corrupted. 2-5-5 + MENU performed
more than once.
Virtual and Physical 2-5-5 + MENU not performed.
channels appear in
channel scan w/Channel
Up/Down.
Can not direct enter Channel not included in
channel number channel scan in TV controller.
P A G E 5 4
L20V54S
Installer Menu
Source Mode Number
CV ONLY 39 REAR_AUX_EN
DTV/PC Auto 35 COMPPORT EN
Possible Solution(s)
Remove power cord for 5 minutes.
Start all over with item 117, set to 001, press Enter then redo Auto Program,
Channel List,Clock, etc. *Note: 2-5-4 + MENU can be done more than once.
After Auto Program and Channel List, etc. press 2-5-5 + MENU to transfer
channels and TV setup to internal TV controller. Afterward, only Physical or
only Virtual channels will appear in digital channel scan, analog channel
scan will be normal.
*Note: Be sure to set item 028 Ch Overide to 000.
After 2-5-5 + MENU, only channels included in TV controller will appear.
If channel is available, redo channel scan. If it is not available it will not
appear on the TV screen.
ENABLE
MPI DATA
STATUS TYPE
0x41 SOURCES
ENABLED (R/W)
Labeling Value Labeling
Rear Video
0x02
(Aux)
Front
0x08
Computer
MPI DATA
DATA STATUS DATA
TYPE 0xD2 STATUS
CURRENT AV TYPE 0X0D
SOURCE (R) AUX
SOURCE
Value Labeling
(R)
Rear Video
1 0(VIDEO)
(Aux)
Front
3 0(VIDEO)
Computer
STATUS
AUX
SOURCE
ASSIGNMENT
1
3
See Page(s)
41
41
41
41