Advertisement
Features
The "Heater: On/Off" switch can be changed according to the usage conditions.
The product will automatically activate when hands are placed under the air
nozzles. Hands will not have any contact with the product or switches, making it
convenient and sanitary.
The product is designed to stop automatically after 60 seconds of continuous
operation. This is to prevent continuous operation due to incorrect operation by
human or product. Once the incorrect operation or sensor error is removed, the
product will automatically return back to normal operation.
Components
Main Unit
Paper towel
Main Unit
dispenser
Machine
unit
Power cable
Drip tray
inlet
Trash bin
Filter
Accessory
Installation Screws
Installation Manual
6Piece(s)
(4.5 × 30)
<Bottom view>
Sensor
Air nozzles
Wall surface
Heater ON/OFF
switch
Power
Filter case
switch
Door Keys
Grounding Screw
1Piece(s)
(M4 × 8)
How to Use
Set the power switch to "ON".
Set the heater switch as required.
The product will activate automatically and blow out dry air when hands
are placed under the air nozzles; when hands move away from the
sensor detection area under the air nozzles, the product will
automatically stop.
How to use the mode switch
Depending on the operating environment, set the heater switch accordingly.
Switch Name
Mode
ON
Heater
OFF
Factory setting "Heater: ON"
Combined power usage for each mode is shown in the table below.
Heater: ON
TYC602P
TYC602P
605 ~ 675W
TYC603P
605W
TYC603P
Approximate power consumption during standby <0.5W.
Purpose of Use
Warm air, faster drying
Save Power
Heater: Off
380 ~ 440W
380W
Advertisement
