Installation - Toshiba RAV-GM561UT-E Installation Manual

4

Installation

REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and
human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit
unpacked by necessity, use buffering cloth or other soft cloth to not damage the
unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or
resin parts).
• Carry the package by two or more persons, and do not bundle it with plastic band
at positions other than specified.
97-EN
– 49 –
 External view
Model RAV- A B C D
GM56 type 256 Ø6.4 Ø12.7 120
GM80 type 319 Ø9.5 Ø15.9 183
GM110 type 319 Ø9.5 Ø15.9 183
GM140 type 319 Ø9.5 Ø15.9 183
Ceiling bottom surface
Ø162
Knockout square hole for branch
duct for Ø150 (2 locations)
101 D
Knockout square
hole for branch duct
for Ø150
129
105
Z
Ceiling bottom
surface
Z-sectional
view
Knockout square
hole for simple OA
for Ø100
Ceiling bottom surface
Ceiling panel (sold separately)
Ceiling bottom surface
80
Ø162
240
105 105
Refrigerant pipe
840 Unit outer dimensions
connecting port (Liquid) B
Electrical control box
860 to 910 Ceiling opening size
Refrigerant pipe
connecting port (Gas) C
408
416.5
690±20
Drain pipe
Hanging bolt pitch
connecting port
(Material : PP)
950 Panel outer dimensions
Knockout square hole for branch
duct for Ø150
480
Hanging bolt M10 or W3/8 (Locally
105
256.5
procured)
16.5
Knockout square hole for branch
duct for Ø150
Unit: mm
172
112
44
Wiring intake
105
Ceiling bottom
129
surface
189
98-EN