Power Source - auna Buddy Manual

EN
30

POWER SOURCE

Charging your DAB
1. To open the battery door located on the back of the unit, press on the
arrows firmly and then slide downward.
2. Connect the Tpye-C cable to the Tpye-C port on .
3. Connect the other end of the Tpye-C cable to a power outlet, using a
USB power adapter. You can also charge the battery by connecting your
Move to a computer's USB port.
Battery operation
1. To open the battery door located on the back of the unit, press on the
arrows firmly and then slide downward.
2. Following the polarity diagram shown in the battery compartment, insert
4 X `C' size (UM-2) batteries (not included) and replace the battery door.
NOTE: For best performance and longer operating time, we recommend
the use of alkaline batteries.
BATTERY WARNING
• Be sure that the batteries are installed correctly. Wrong polarity may
damage the unit.
• Use only the size and type of batteries specified.