Restoring Default Settings - HiLook NVR-104MH-D/4P User Manual

NVR-104MH-D/4P Network Video Recorder User Manual
Enter the FTP Server Address in the text field.
Click the Upgrade button to start upgrading.
After the upgrading is complete, reboot the NVR to activate the new firmware.

14.6. Restoring Default Settings

Enter the Default interface, Menu > Maintenance > Default.
Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask,
gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to
the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to inactive status.
Click the OK button to restore the default settings.
NOTE:
The device will reboot automatically after restoring to the default settings.
UM NVR-104MH-D/4P 082521NA
Figure 234, FTP Upgrade Interface
Figure 235, Restore Defaults
158