Step 3 - Align Door; Step 4 - Level Refrigerator - Haier HRC2731ACB Installation And User Manual

INSTALLATION INSTRUCTIONS
STEP 3 - ALIGN DOOR (If necessary)
1. Using a flat-blade screwdriver, gently insert the blade under the top hinge
cover and pry up to remove.
2. Using a Phillips-head screwdriver, loosen the three top hinge screws.
3. Adjust the door or put a spacer between the hinge and cabinet, and then
tighten the screws.
4. Replace the top hinge cover by first aligning the back of the cover with the
back of the hinge, and then pressing down firmly on the front of the hinge
cover until it is fully seated.

STEP 4 - LEVEL REFRIGERATOR

Your refrigerator has two leveling legs located in the front, bottom corners.
After placing the refrigerator in its final position, level the refrigerator.
NOTE: The refrigerator door will close easier when leveling legs are
extended.
Adjust the Leveling Legs:
To Raise – Turn the leveling legs to the left.
To Lower – Turn the leveling legs to the right.
Raise
12
Lower
49-60794