Removing Collected Water - d2itsu APD-12CK User Manual

Removing Collected Water

There are 2 ways to remove collected water:
1
Use the continuous drainage option from the lower hole.
NOTICE:
When using the continuous drainage option from the bottom hole, install
drainage pipe as follow before using, otherwise poor drainage will affect
normal operation of the unit.
■ Instructions for drainage pipe installation.
1. Fix the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
2. Remove the rubber plug at drainage port.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
drainage port
drainage port
drainage pipe
drainage port
screw
pipe hoop
22
drainage pipe clip
pipe hoop
rubber plug
drainage pipe clip