Service Mode; Factory Mode Automation Behavior - Sharp LC-50LE442U Service Manual

Note:
1. Use Minolta CA-210 for color coordinates and luminance check.
2. Before adjusting, all color analyzers (CA-210) should be coordinates with a
same reference TV set.
3. Luminance>=240 cd/m2 in the center of screen when Brightness control at
100,Contrast control at 100,Backlight control at 100.(For LC-50LE442U ,Test
color mode: User mode)

[2] SERVICE MODE

Enter factory mode menu: press MENU + Numeric keys "3481" to enter factory
mode.
You can press "RETURN" key to back to normal main menu.

[3] FACTORY MODE AUTOMATION BEHAVIOR

For factory checking channels convenient, so entered factory mode will auto install
factory pre-channels to instead of user's channels table, after exited Factory mode,
the pre-channels will be cleared.
19