Lighting Instructions (continued)
1. Remove any items necessary for easy access to the pilot (for example: logs, screens, etc.).
2. Follow appropriate lighting instructions found previously. Instead of using the auto spark ignition
system, light a match and hold the flame to the end of the pilot and ignite the pilot.
3. After control knob has been released and pilot stays lit, reinstall any items that were removed for pilot
access.
4. Call a qualified service technician for repair or replacement of the auto spark.
MATCH LIGHTING INSTRUCTIONS
Monessen • Mojo Installation/Owner's Manual • 4614-900 Rev. C • 01/19
33