Transferring Data To Another Ps3™ System/Restoring The System; Transferring Data To Another Ps3™ System; Restoring The Ps3™ System - Sony CECH-2504B Instruction Manual

Transferring data to another PS3™ system/restoring the system
Transferring data to another PS3™ system
You can transfer data that is saved on the hard disk of one PS3™
system (the source system) to the hard disk of another PS3™ system
(the destination system) by selecting
Settings) [Data Transfer Utility].
Notice
When you perform this operation, all of the data that is stored on the PS3™
system that will receive the data (the destination system) will be deleted.
For details on how to use the utility and its limitations, refer to the online
user's guide (http://manuals.playstation.net/document/).
Restoring the PS3™ system
Notices
 If you restore the default settings or restore the PS3™ system, changes to
the settings cannot be undone. Data loss or corruption is the
responsibility of the user.
 Do not turn off the PS3™ system during this operation. If the operation is
cancelled before completion, the system software may become damaged,
and the system may require servicing or exchange.
 During this operation, the power button on the system and the PS button
on the wireless controller are not active.
 You cannot use this feature to go back to an earlier version of the system
software.
(Settings) (System
Restoring default settings
You can restore from the current settings under
default settings by selecting
[Restore Default Settings].
After you complete the operation and restart the system, the initial
setup screen will be displayed. Follow the on-screen instructions to
perform initial setup of the system software (
Deleting data on the hard disk drive
You can delete all data on the system's hard disk and restore from
the current setting under (Settings) to the default settings by
selecting (Settings) (System Settings)
System].
You can shorten the time required to perform this operation by
selecting [Quick Format] from the list of hard disk format options. It is
recommended that you select [Full Format] when formatting a hard
disk that contains important or sensitive data.
After you complete the operation and restart the system, the initial
setup screen will be displayed. Follow the on-screen instructions to
perform initial setup of the system software (
(Settings) to the
(Settings) (System Settings)
page 15).
[Restore PS3™
page 15).
GB
41