For Products With A; Water Dispenser; Child Safety - Beko GF200E40WCHN User Manual

Hide thumbs Also See for GF200E40WCHN:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
between devices
should be at least 8cm.
Otherwise, adjacent
side walls may be
humidified.
• The product shall never
be used while the
compartment which
is located at the top or
back of your product
and in which electronic
boards are available
(electronic board box
cover) (1) is open.
1

For products with a

water dispenser;

• Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
• If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers is you are not
sure that there is no
1
water hammer effect
in your installation.
• Do not install on the
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
• Use only potable water.

Child safety

• If the door has a lock,
11
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfne200e40wnRfne200e32wn

Table of Contents