Table of Contents
Advertisement
UPRITE COVER LIFTER INSTALLATION
STEP 1
ATTACH SIDE ASSY
1. Align (Left Side Assembly) against the lip
of the Spa Shell, making sure to align the
Scribe on (Side Assembly Channel (C))
with line traced on top the aluminum plate
(Figure 2.1)
1. Place a straight edge ruler under the spa
2
shell lip on the back-left part of the spa.
Align the back of the Auxiliary Bracket (D)
with the straight edge ruler (Figure 2.2).
2. While holding in place the straight
3
edge ruler aligned with the back side of
Auxiliary Bracket (D) and using the small
holes on the Auxiliary Bracket (D), mark
(4) holes. Mark the holes starting from
the hole pointing toward the middle of the
spa, working your way towards the edge
of the spa (Figure 2.2).
5
C
D
H
Figure 2.1
a. Spa pre-drill depth
4 a
2. Using the marks made on the spa cabinet
on previous step, drill 1/8" (3mm) holes
at a depth of 1/2" (12.5 mm) max into spa
cabinet (Figure 2.2).
b. Endless Pools pre-drill depth
2. Using the marks made on the spa cabinet
4b
on previous step, drill 1/8" (3mm) holes at
a depth of 1" (25 mm) max into Endless
Pools cabinet (Figure 2.2).
Spacers (Y) will be required in the following
steps. Spacers (Y) are provided in Bag #4.
All spacers come with pre-drilled holes
C
D
A
H
Figure 2.2
Advertisement
Table of Contents
