Setup - Ninja Jump Slide and Splash with Pool Owner's Manual

Table of Contents

Advertisement

Set up, installation, deflation and handling should be done by a QUALIFIED
ATTENDANT ONLY.
The inflatable may weigh over 200 lbs. Caution should be exercised when lifting
and handling the equipment. Use a dolly to move the equipment.
1. DO NOT set up when windy and or it rains.
2. Select a level area that is a safe distance from water, walls and other
obstructions.
3. Make certain that there are no overhead utility wires and ground obstacles
such as protruding sprinklers or underground pipes of any kind before
laying the protective tart on the selected area.
4. Place the inflatable in the middle of the tarp and unroll the unit after
removing the straps.
5. Connect either tube snugly {choose the one closest to the electricity
source) to the blower using the strap attached to the tube. Make sure that
all intake openings of the blower are free from any obstructions.

SETUP

- 2 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Slide and Splash with Pool and is the answer not in the manual?

Questions and answers

Table of Contents