Table of Contents
Related Manuals for Ninja Jump NDL-S
Summary of Contents for Ninja Jump NDL-S
- Page 1 3221 San Fernando Rd, Los Angeles, CA 90065 Tel: (800) 888-8148 * Fax: (323) 255-1312 Web: www.ninjajump.com E-mail: info@ninjajump.com OWNER’S MANUAL SAFETY RULES Double Lane Slide SKU: NDL-S READ AND SAVE THESE INSTRUCTIONS...
- Page 2 OWNER’S MANUAL OPERATING INSTRUCTIONS & SAFETY RULES (Ninja Jump’s Giant Slide) Double Lane Slide Product Dimension: 27’0”L x 19’6”W x 18’0”H – 575 lbs OPERATING INSTRUCTIONS Select the area in which the inflatable will be inflated. The following ground locations are good for setting up the jumper: medium dense coarse sands, sandy gravels, very stiff silts, and clays.
- Page 3 After the unit is inflated, check with the customer if the placement of the inflatable is satisfactory. If so, connect the 3/8” steel shackle found on the tie down straps of the ride to the 330A Chance Anchor and drive the anchor into the ground at a minimum depth of 16”...
-
Page 4: Blower Instructions
BLOWER INSTRUCTIONS 1. Applications: The primary application for the blower is the pressurization of inflatable interactive games and other types of inflatables requiring sustained high air pressure. 2. Operation: Place the blower in the desired area pointing towards the inflatable. Place the blower on a stable surface. -
Page 5: Troubleshooting Chart
3.13. Never operate the blower without safety guards in place. If guards are removed for servicing, then they must be replaced to the proper position before operation of the blower. 3.14. Inspect the unit carefully before each use. If the unit appears to have damage, repair or replace before use. -
Page 6: Safety First
Problem Possible Causes Corrective Action Poor air flow Restriction on air inlets Clean inlets Fan blows circuit breaker Too long extension cord Max. length is 100 ft. Move closer to outlet Other appliances in outlet Find cleaner circuit or Different higher rated breaker Scraping noise in blower Blower wheel imbalanced Replace blower wheel Noise fan, weak pressure Fan spinning backwards... -
Page 7: Additional Safety Rules
ADDITIONAL SAFETY RULES 1. No riders should be allowed on a partially inflated unit. 2. All Inflatables should be securely anchored and fully inflated before any riders are allowed to enter. 3. Maximum number or riders of each group that should play in the unit at one time is 2 riders or a Maximum Weight of 500 lbs;... -
Page 8: Repairs & Maintenance
REPAIRS & MAINTENANCE To repair holes and tears up to 12”, use “Single Patch Method,” utilizing the patch kit provided with each unit as follows: (1) Cut an oval or round shape vinyl patch, approximately 2” larger than the cut; (2) Clean around the torn area; (3) Apply glue on the patch and around the torn area;... - Page 9 Ninja Jump’s standard package for Giant Slides does not include the ground anchors described in the Owners Manual but orders shipped starting Feb 1, 2007 will include 8 sand bags.
- Page 11 The following checklist is to be performed together in the presence of the Owner/Operator and the Renter upon each installation and set up of each inflatable ride and game manufactured by Ninja Jump, Inc. The following checklist is to be performed together in the presence of the Owner/Operator and the Renter upon each installation and set up of each inflatable ride and game manufactured by Ninja Jump, Inc.
- Page 12 The following checklist is to be performed together in the presence of the Owner/Operator and the Renter upon each installation and set up of each inflatable ride and game manufactured by Ninja Jump, Inc. Failure to read, understand, and follow these rules could result in injury.
- Page 13 Scheduled Inspection and Maintenance Log The following checklist is to be performed before each set up and operation of each inflatable ride and game manufactured by Ninja Jump, Inc., and as noted in the ASTM F-24 Standards on Amusement Rides and Devices. Failure to perform and document these inspections could result in injury and death, and non- compliance of state regulatory rules and regulations.
- Page 14 Scheduled Inspection and Maintenance Log The following checklist is to be performed before each set up and operation of each inflatable ride and game manufactured by Ninja Jump, Inc., and as noted in the ASTM F-24 Standards on Amusement Rides and Devices. Failure to perform and document these inspections could result in injury and death, and non- compliance of state regulatory rules and regulations.
- Page 15 Scheduled Inspection and Maintenance Log The following checklist is to be performed before each set up and operation of each inflatable ride and game manufactured by Ninja Jump, Inc., and as noted in the ASTM F-24 Standards on Amusement Rides and Devices. Failure to perform and document these inspections could result in injury and death, and non- compliance of state regulatory rules and regulations.
- Page 16 Scheduled Inspection and Maintenance Log The following checklist is to be performed before each set up and operation of each inflatable ride and game manufactured by Ninja Jump, Inc., and as noted in the ASTM F-24 Standards on Amusement Rides and Devices. Failure to perform and document these inspections could result in injury and death, and non- compliance of state regulatory rules and regulations.