Table of Contents
Advertisement
GETTING STARTED
Placement
Before use, remove oil packaging materials, including bottom cushions, foam pads and tope
from inside the refrigerator. Remove any protective films on the doors and body.
Place the refrigerator in a location away from heat and direct sunlight. Do not place the
freezer in a moist or watery location to prevent rust. Ensure the refrigerator is placed on a
stable, flat surface. Make sure the unit cannot be rocked side to side, back and forth or
diagonally.
Ensure there are at least 30cm of space above the top of the refrigerator, plus at least 10cm
of space to each side to allow for the dissipation of heat.
Levelling Feet
•
Turn the feet clockwise to raise the refrigerator.
•
Turn the feet counterclockwise to lower the refrigerator.
Swapping the Door
To swap the door sides, you will need the following tools (not supplied).
Phillips-head Screwdriver
5/6" Socket and Ratchet
Putty Knife + Flathead Screwdriver
Masking Tape
Advertisement
Table of Contents
