Cleaning And Care - Kogan KA95SCFRDGA User Manual

CLEANING & CARE
Cleaning
•
Dust behind the refrigerator and on the ground should be cleaned to improve the
cooling effect and improve energy efficiency. The interior of the refrigerator should
be cleaned regularly to avoid odours. Soft towels or sponges dipped in water and
non-corrosive neutral detergents are suggested for cleaning. The freeze should be
cleaned with clean water and dry cloth. Open the doors and allow the unit to dry
naturally before dosing the doors and turning the power back on.
•
Do not use hard brushes, steel wool, wire brushes, abrasives, organic solvents,
boiling water, acids or alkaline items to clean the refrigerator.
Defrosting
•
Unplug the power cord.
•
Remove food and store it properly to avoid food spoilage.
•
Clear the drainpipe.
•
Race down trays to catch the water as the frost melts.
•
You can let the freezer defrost using the natural temperature of the room.
•
If there is a large amount of ice, an appropriate amount of hot water can be used to
speed up the melting process.
•
Once defrosted, close the fridge and plug the unit back into a power outlet.
•
After a few hours, you are safe to return the food to the freezer.
Out of Operation
•
Power Failure: In the event of a power failure, even in summer, the food inside the
refrigerator will stay cool for several hours. While the power is out to ensure that the
door is not opened and fresh food is not added to the fridge.
•
Not in Use: If you will not be using the fridge for an extended period, you should
unplug the refrigerator from the power outlet and dean it thoroughly. The door
should be kept open to prevent odours.
•
Moving: Before the refrigerator is moved, you should remove all food objects. Then
fix all-glass partitions, vegetable holder, freezer drawers etc. with tape. Tighten the
levelling feet, then close the doors and scot them with tape. While moving, the
refrigerator must not be turned upside down or laid down.
To improve the longevity of the refrigerator, once it has been set up and turned on, it should
be disrupted as little as possible. Starting the unit up and shutting it down or moving it, will
both significantly shorten the life expectancy of the unit.