Siemens WTWH7660GB Installation And Operating Instructions Manual page 22

Table of Contents

Advertisement

Display
en
--------
Indicator/
Description
symbol
Programme status:
Drying
Š
Dryness level: Iron Dry
ö
Dryness level: Cupboard Dry
»
Dryness level: Cupboard Dry
Ò
Plus
Anti-Crease
Q
- ˜ -
Pause
Program end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. ñ 02:45
Programme delay
Empty the condensation con-
ð
tainer ~ Page 33
Fluff filter
å
Automatic heat exchanger
ó
rinse
Rinsing progress indicator
ªªª
Wi-Fi
|
Energy manager
±
22
Information
Continuously lit: Status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in"
time
Empty the condensation container and then rein-
sert it.~ Page 33
Then press A (Start/Pause).
Clean the filter in the condensation container.
If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 45
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
Remove the fluff ~ Page 34
The heat exchanger is cleaned automatically. Do not
pull out the condensation container or cancel the pro-
gramme while this is displayed.
Off: Wi-Fi is switched off and your appliance is not
connected to your home network.
Flashing: The appliance is trying to connect to your
home network.
Lit: Wi-Fi is switched on and your appliance is con-
nected to your home network.
Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)

Advertisement

Table of Contents
loading

This manual is also suitable for:

6 series

Table of Contents