LG Spectrum VS920 User Manual page 50

Connecting to Networks and Devices
48
Using the Status Bar to change the settings
The Status Bar shows the current USB connection mode so you can easily
open the Status Bar and change the settings as needed.
When connected via USB, the current USB connection mode also appears
on the Notifications panel. Touch the connection setting to display a screen
where you can change the USB connection mode.
NOTE If the Always ask checkbox is marked, the screen is only provided during USB
connection, but is not provided in the notification area.
Step 1. Connecting the phone to a PC
# Connect your phone to your PC with a compatible USB Cable
# Click 'I accept the terms in the agreement' and 'Yes'.
NOTES Autorun is only supported for Windows
●
The USB Autorun feature works only under an Administrator account. The installer has
●
insufficient privileges under a Non-Administrator account. Log on as Administrator. The
device is switched back to the user set mode within 30 seconds.
(supplied). LG Autorun starts automatically.
® ®
XP, Windows Vista, and Windows
®
7.