Advertisement
Mono mode (Single earbud use)
Note: Single channel mode only needs to remove one of earbuds from the charging
•
case. If two eabuds are removed from the case before connection, the earbud will
be used in bilateral channel mode by default.
•
Take out an earbud from charging case, the earbud will automatically turn on and
reconnect to previously connected devices.
•
To switch from one earbud to the other when playing music, remove the second
earbud from the charging case. The two earbuds will connect automatically. Put
the first earbud (the one you no longer wish to use) into the charging case and the
switching process completes.
Restore factory settings
•
If the earbuds cannot pair or disconnect frequently, please restore the factory
settings.
•
Turn on both earbuds and the tap the left and right MFB four (4) times. When one
earbud indicator starts flashing alternately with white and orange and the other
earbud indicator is turn off, the reset is completed.
Charging
Case:
•
Charge the case using the Type-C cable connected to a computer or wall charger.
The indicator at the front of the charging case flashes white when charging and
turns white when fully charged. Charging time is approximately 1.5 hours.
Earphones:
•
Put the earbuds back into the charging case for charging. While charging, the
indicators turn orange. Once full charge, the orange lights turn off.
Advertisement
