Advertisement
2.
As shown in Figure 3c, pull the backboard bracket (CC) on both sides.
3.
Fix the top end of backboard bracket (CC) behind the backboard (DD) by bolt (K1).
4.
As shown in the figure, connect the backboard brace (S) and (T) on backboard
bracket (CC) by B bolt set (B1, B2, B3, B4, B5). The sleeve (B3) must be installed
inside the backboard bracket (CC).
Figure 3e
Figure 3c
Figure 3d
This end face
backboard
Figure 3f
Advertisement
