Advertisement
Step 2:
1.
Fix the bottom end of pole brace (U1), (U2), (U3), (U4) on the base by J bolt set (J1,
J2, J3) as per Figure 2. Pay close attention to the directions of the four-pole brace.
2.
Insert the middle pole (X) into bottom pole (Y), Fix the middle pole (X), bottom pole
(Y) and top end of four pole braces together by x1 G bolt set (G1, G2, G3) and x1 E
bolt set (E1, E2, E3) as shown in Figure 2.
3.
Fix the pole bracket (Q) and (K) on the middle pole (X) by x2 E bolt set (E1, E2, E3)
as shown in Figure 2. Note that the pole bracket (Q) must be backward.
Note:
The 2 wheels (M) are installed on the back of base (KK) by shaft (V1).
Bolt G
Bolt E
Figure 2
Bolt J
Advertisement
