First Steps - Iceking IK5558WE Installation And Operating Manual


Unpack the appliance and check to see if there is any damage. Do not
connect the appliance if it is damaged. Report the damage immediately
and retain the packing.

If there is no damage to the appliance remove all packaging and securing
tape from the appliance and dispose of it correctly (see 'Environmental
Protection' Page 26).

If this appliance is to replace an old refrigerator with a lock, you must
as a safety measure break or remove the lock and/or door before
disposal.

Disconnect the mains plug from the mains socket. Cut off the
mains cable as close to the appliance as possible and discard.

Your old appliance contains insulation gases and refrigerant that
must be disposed of correctly. Please
circuit is not damaged
disposal, in line with current legislation. If there is any doubt contact
your Local Authority for instructions.

This appliance may contain the refrigerant isobutene (R600a). This is
a natural gas with a high level of environmental compatibility;
however, caution is required as isobutene is a flammable gas. It is
essential to ensure that refrigerant tubes are not damaged during
transportation and the installation of the appliance. In the event that
the refrigerant circuit is damaged, avoid naked flames or sources of
ignition and ventilate the room in which the appliance is situated.

FIRST STEPS:

ensure that the refrigerant
before the appliance is taken away for correct
5