LG AP-Z488TC0 Owner's Manual page 17

Plasma Air Purifying Operation Procedure
1
Air Purifying Operation only
1
Press the Plasma Air Purifying Operation Start/Stop Button.
(Operation will start when the button is pressed, and stop when the button is pressed again.)
2
Select Fan speed.
The display shows low fan speed at the initial condition.
• You can operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
dry or Auto mode.
2
Air Purifying Operation with Cooling or any other Operateion.
1. Press the Start/Stop Button.
2. Select the desired Operation Mode.
3. Press the Plasma Air Purifying Operation ON/OFF Button.
4. Set the fan speed.
A/CL
Low
Operating Instructions
Mid
Owner's Manual 17