Advertisement
INSTALLATION
Installing the Chassis into the Cabinet
1.
Team lift (two people) the air conditioner chassis and
carefully slide it into the cabinet. Let the front of the air
conditioner hang out approximately 6".
2.
CAUTION: DO NOT PUSH ON THE CONTROLS
OR FINNED COILS.
3.
Be sure the chassis is firmly seated in the back of the
cabinet.
4.
Insert all screws removed during window installation
and reattach the front face plate, front panel, and the air
filter. Use the REMOVE CHASSIS instructions and
figures 3-7 on page 8 for reference.
Extend the Curtain Panels
1.
Carefully raise the window to expose the curtain
panel and panel frame. Extend the curtain panels to
fill the window opening.
2.
Place the curtain lock between the curtain exten-
sions and the window sill, drive locking screws
through the lock and into the sill.
Secure the Air Conditioner
1.
Secure the left and right flanges on the lower end
sides of the panel with long screws (See Fig. 13).
2.
Drive locking screws through upper frame holes
into window sash.
Flange
Curtain Locks
Window Sill
Fig. 13
Curtain
Advertisement
