Foam Stand Assembly - RaceAmerica Timer MB 3210 Series Owner's Manual

7540C - Foam Stand Assembly Instructions
Base Foam
'AA' Battery Emitter (5040B, 5050B & 5058B)
1. Install batteries and turn on the Emitter.
2. Separate the Base of the Foam Stand from the Top.
3. Place the 5040/5050/5058 Emitter into the Base
foam with the battery side down.
4. Slide the Top on the Base. Place on the track.
Track Sensor (5140D & 5158D)
1. Separate the Base of the Foam Stand from the Top.
2. Connect the cable to the sensor
3. Place the 5140/5158 Sensor into the base (open end down)
4. Press the Top on the Base. Place on the track.
'C' Battery Emitter (5042B)
1. Same as above except place the 'C' Battery pack in
the Base standing on its edge.
For additional stability
1. Place weight in the Base well as required.
Outside Dimensions:
6.5" W x 7.25" L x 7.5" H
Top Foam
Assembly Components
Complete Assembly
RaceAmerica Model 3210 Timer MB
Emitter
Sensor
placement in Foam Base
Note cable routing
Sensor/Emitter
Sensor back
17