Selection Of Av And Multimedia Input Signal - DAEWOO ELECTRONICS DLP-26C2 Instruction Manual

When watching video, Camcorder, DVD, Cable TV with AV
- See page 12 for connection method of Camcorder and Video.
- When pressing "
TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV
1. Pressing the "
"(AV) button on the remote controller.
• The screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => TV
Note :
Cautions in menu setup
• The menu disappears if you do not operate any button for about 25 seconds from the menu.
• In the case of connecting both composite video signal and S-video signal at the AV3 terminal, the S-
video signal has priority.
• If sound signal is mono only, connect it to the L-terminal of the sound input terminal.
All manuals and user guides at all-guides.com
" button on the TV set, screen changes as follows:
PR 3
Mono
Clock 12 : 00
PR 3
AV3 / S-Video
Clock 12 : 00
Selection of AV and
Multimedia Input Signal
31
MUTE POWER
PICTURE SOUND MULTIMEDIA
ASPECT RECALL
PR
V V
PR 3
AV 1
Clock 12 : 00
PR 3
AV 2
Clock 12 : 00