Table of Contents
Advertisement
Checking the Digital Electronic Programme Guide
(EPG)
Digital Electronic Programme Guide (EPG)
To
Do this
Turn off the EPG
Press
.
F
f
G
g
Move through the EPG
Press
/
/
/
Watch a current programme
Press
while the current programme is selected.
Sort the programme information by
1
Press the blue button.
F
f
category – Category list
2
Press
/
displayed on the side.
The categories available include:
"Favourite": Contains all the channels that have been stored in the
Favourite list (page 17).
"All Categories": Contains all available channels.
"News": Contains all news channels.
3
Press
.
The Digital Electronic Programme Guide (EPG) now only displays the
current programmes from the category selected.
F
f
Set a programme to be recorded – Timer
1
Press
/
REC
record.
2
Press
.
F
f
3
Press
/
4
Press
to set the TV and your VCR timers.
A
symbol appears by that programme's information. The
indicator on the TV (front) lights up.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
• If an age restriction for programmes has been selected, a message asking for pin
code will appear on the screen. For more details refer to "Parental Lock" on
page 29.
All manuals and user guides at all-guides.com
1
In digital mode, press
to display the
Digital Electronic Programme Guide
(EPG).
2
Perform the desired operation, as shown in
the following table.
Note
Programme information will only be displayed if the TV
station is transmitting it.
.
G
g
/
/
to select a category. The category name is
G
g
/
/
to select the future programme you want to
to select "Timer REC".
Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 4)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press
/
repeatedly until the correct input
symbol (see below) appears on the screen.
AV1/
AV1,
AV2/
AV2:
Audio/video or RGB input signal through the scart
socket
/
1 or 2.
appears only if an RGB
source has been connected.
AV3:
Component input signal through the Y, P
/C
, P
/C
B
B
R
R
sockets
/
3, and audio input signal through the
L, R sockets
/
3.
AV4/
AV4:
Video input signal through the video socket
4, and
audio input signal through the L (MONO), R audio
sockets
4.
appears only if the equipment is
connected to the S video socket
4 instead of the
video socket
4, and S video input signal is input
through the S video socket
4.
5:
RGB input signal through the PC connectors
5, and
audio input signal through the socket
.
AV6:
Digital audio/video signal is input through the HDMI IN
6 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
Additional operations
To
Do this
Return to the normal
Press DIGITAL or ANALOG.
TV operation
To
Do this
Access the Input
Press
to access the Input signal
signal index table
index table. (Then, only in
g
analogue mode, press
.) To
F
f
select an input source, press
/
,
then press
.
Advertisement
Table of Contents
