Paper Jams; Automatic Functions - Kobra AF.2 COMPACTOR Operating Instructions Manual

IMPORTANT:
The automatic function can be used for bound blocks
up to a maximum of 25 sheets. Provided the type of
staple used is no longer than 6 mm and the block is
inserted with the points facing downwards.
WARNING: The Kobra AF.1 and AF +1 shredders are
NOT able to shred the following types of documents
with:
Staples with a
shaft longer than
6mm
Bulldog clips
Adhesive labels
Plastic sheets, laminated ocuments, plastic folders
documents, plastic folders
AUTOMATIC COMPACTOR (FOR KOBRA AF.2 MODEL
ONLY)
The KOBRA AF.2 COMPACTOR shredder is equipped
with an automatic
capable of reducing the volume of shredded paper
into the collection bag up to 4 times, increasing
bag capacity and avoiding frequent emptyings.
Compacting
shredding security
The compacting system starts automatically with the
start of paper shredding and stops when the shredding
process is completed.
IMPORTANT!
TIPS WHEN EMPTYING THE COLLECTION BAG
- Due to the high level of compaction, when emptying
the collection bag, in order to prevent paper shreds
from falling into the cabinet, we recommend to place a
hand over the paper shreds at the top of the bag and
apply some pressure to keep the shreds down into the
collection bag (as shown in figure 5) and - at the same
time - slowly extract the bag.
- If the machine is switched off (switch in «0» position)
during the destruction, the collection bag could be
blocked and not removable. Return the switch to «I»
position and then open the door.
Large paper clips
Spiral bindings
Magazines or other
documents bounds
with a number of
stitchings or staples
paper compacting
paper increases
of one

PAPER JAMS

This is what to do if the shredder jams:
- Manually put the shredder into reverse once
or more times by moving the switch (H) to
the position "R".
Open the top cover of the feeder tray.
-
Remove the paper jam
-
Once you have freed the cutters of the paper jam, put
some paper in the feeder tray, close the cover again
and now your shredder is ready to go.

AUTOMATIC FUNCTIONS

The KOBRA AF models are equipped with the following
automatic functions:
-PHOTOCELLS to start the machine automatically
-AUTOMATIC RETURN anti-jamming function: if you
accidentally insert more paper than the shredder's
maximum capacity this function switches off the power
to the electric motor and then sends it into reverse for
a few seconds in order to free the cutters and puts the
shredder on stand-by.
Remove the paper from the throat in order to resume
shredding, free the photocells and then insert a smaller
number of sheets of paper.
-MOTOR PROTECTOR which automatically stops the
machine in case of overheating.
(If the motor protector comes on, let the shredder
rest for at least 10/15 minutes. The shredder will then
restart automatically).
-AUTOMATIC STOP If the bag is full or the door is open
with red warning light flashing (I).
- ENERGY SMART SYSTEM which automatically reduces
power consumption when on STAND-BY and when 12
seconds have passed since the last automatic shred
system
cycle.
level.
Fig.5
8