Download Print this page

Curtis THERMAL FRESHTRAC TFT64 Manual And Cleaning Instructions page 4

64 ounce dispenser

Advertisement

The Quality Timer is ALMOST expired and the TFT
Server is ALMOST empty
LED Display Activity:
• The Green and Red LED lights will flash in a Green/Red
sequence every 6 seconds.
RESET AND WIPE THE TFT STEM CLEAN BEFORE EACH BREW CYCLE
Keeping the TFT stem free from coffee oil build-up ensures that accurate time and
volume information is displayed. Before each brew cycle, wipe TFT stem clean and
invert (as shown) for 30 seconds. Replace and brew.
1
Completely empty dispenser before cleaning.
2
Place dispenser with brew-thru FreshTrac
under the coffee brewer.
3
Remove the brew basket and place cleaning
products in the center of the brew basket and
replace (see product supplier information for
number of cleaning tablets needed).
4
Press the brew button to brew hot water and the
cleaning solution into the dispenser.
5
When the cycle is complete, leave the cleaning
solution in the dispenser for approximately 15
minutes.
Use a cleaning brush to remove coffee oil
6
build-up from inside the dispenser. Empty the
dispenser.
7
Place under the brewer and run another brew
cycle with water only to rinse the dispenser.
8
Empty the dispenser and run one more brew
cycle with water only.
9
Rinse and empty. Dry thoroughly.
Service & Sales
1-800-421-6150
TFT DISPENSER CLEANING
lid
TM
CLEANING TOOL
JB-1
(or other similar brush)
TFT COFFEE SERVER PRECAUTIONS
Do not immerse coffee server in water.
Do not place in dishwasher.
Do not use harsh powders or cleaners
containing chlorine.
Do not use a wire brush or pot scour to
clean inside liner.
www.wilburcurtis.com
03/2014 F-3976 revNC

Advertisement

loading

This manual is also suitable for:

Thermal freshtrac tft64d