Advertisement
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
AA
BB
Part
Description
#8-32 x 3/4" philips mounting bracket screw
AA
BB
Wire nut
CC
Photocell Black Cover Label
PACKAGE CONTENTS
E
A
Part
Description
Light fixture
A
Conduit entry plug
B
Mounting base tightening screw (pre-installed)
C
Mounting base plate
D
E
Photocell lens
Visit www.probrite.com/install for installation video tutorials and product support
CC
Quantity
2
3
1
D
C
B
Quantity
1
1
2
1
1
4
Installation
1
For best results
☐
The fixture can be mounted in the
following two ways:
☐
Junction Box Mount: Use a
junction box to mount the fixture.
☐
Surface Conduit Mount: The
fixture can also be mounted
directly on the wall surface using
conduit entry.
☐
When mounting fixture, for Dusk
to Dawn operation, make sure the
photocell orientation is at the top for
wall mount, in an area that receives
daylight and not too close to reflective
surfaces.
☐
When installing two fixtures on one
switch, make sure the switch is rated
for at least a 1A inductive load.
☐
Do NOT wire to dimming switch.
NOTE: Mounting base (D) mounts to recessed
mounted standard junction boxes or to the
surface directly. Junction box must be at least
1-1/2 inch in depth for proper installation for
recessed mount application (fig 2).
2
Shut electric power off
☐
At wall switch verify it is in the off
position (fig 1).
☐
At the main electrical panel turn off
the circuit breaker that supplies power
to the outlet box you are working on
(fig 2).
☐
For screw-in type fuses unscrew the
fuse that supplies power to the outlet
box you are working on (fig 3).
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
Wall Mount
1-1/2"
1-1/2"
(fig 2).
Round
Octagonal/
(fig 2).
(fig 1).
(fig 3).
5
PROBRITE.COM
Advertisement
