Service; Warranty - Husqvarna R 214T Operator's Manual

Cutting deck
Cutting width, mm
Cutting height, 10 positions, mm
Weight, kg
4
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed
dB(A)
5
Sound levels
Sound pressure level at the opera-
tors ear, dB(A)
6
Vibration levels
Vibration level on the steering wheel,
2
m/s
Vibration level in the seat, m/s
Blade
Blade length, mm
Article number
WARNING:
is not approved for the product can cause
objects to eject at high speed and cause

Service

Do a yearly check at an authorized service center to
make sure that the product functions safely and at its
best during high season. The best time to do a servicing
or overhaul of the product is low season.
Transmission warranty
Applies to R 216T AWD only.
The transmission warranty is only applicable if checks
are done of the front and rear wheel rotation speed as
given in the maintenance schedule. To prevent damage
4
Noise emissions in the environment measured as sound power (L
2000/14/EC.
5
Noise pressure level according to EN ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB(A).
6
Vibration level according to EN ISO 5395. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 0.2 m/s
1686 - 001 - 03.11.2021
Combi 94
940
25–75
36
97
98
85
1.9
2
0.29
358
579 65 25-10
To use a cutting deck that
Service

Warranty

2
(steering wheel) and 0.8 m/s
Combi 103
1030
25–75
43
98
99
86
1.9
0.29
388
504 18 82-10
serious injury. Do not use other cutting deck
types than specified in this owner's manual.
When you send an order for the spare parts, give
information about the purchase year, model, type, and
serial number.
Always use original spare parts.
to the transmission system, let an authorized service
agent adjust it. Refer to the table values specified in the
workshop manual.
) in conformity with EC directive
WA
2
(seat).
33