Idrac Quick Sync 2 Indicator Codes - Dell Precision 7920 Owner's Manual

Table 8. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Flashing green (on for
two seconds and off for
two seconds)
Turns off

iDRAC Quick Sync 2 indicator codes

iDRAC Quick Sync 2 module (optional) is on the front panel of your system.
Figure 8. iDRAC Quick Sync 2 indicator
Table 9. iDRAC Quick Sync 2 indicators and descriptions (continued)
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly
and then turns off
Solid amber
Blinking amber
22 Disassembly and reassembly
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the
iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Corrective action
If the LED fails to turn on, reset the left
control panel flex cable and check. If the problem
persists, see the Getting help
If the LED fails to turn off, restart the system.
If the problem persists, see the
section.
NA
If the problem persists, see the
section.
NA
If the indicator continues to blink indefinitely, see
the Getting help section.
Check if iDRAC Quick Sync 2 feature is
configured to be disabled by iDRAC.
If the problem persists, see the
section.
For more information, see Integrated Dell
Remote Access Controller User's Guide at
dell.com/idracmanuals or Dell OpenManage
Server Administrator User's Guide at
openmanagemanuals .
Restart the system.
If the problem persists, see the
section.
Restart the system.
section.
Getting help
Getting help
Getting help
dell.com/
Getting help