9. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
2.5-inch secondary hard disk drive
1. Remove the computer cover. See "Computer cover" on page 44.
2. Disconnect the signal cable and the power cable from the 2.5-inch secondary hard disk drive.
3. Remove the 2.5-inch secondary hard disk drive.
4. Install the 2.5-inch secondary hard disk drive.
5. Connect the signal cable and the power cable to the new hard disk drive.
6. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
.
Chapter 7
CRU replacement
51