Page 2
Please read these instructions first before using your appliance Dear Customer, Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur.
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •...
2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician.
Total power (W) 2200 Main model code Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko WTG941B3W Model name 7145644500 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh)
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's turning them slightly.
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. • To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the 1 Tighten the nuts of the hose by hand.
4.1.7 Electrical connection The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need Connect the product to a grounded outlet to be replaced an ASTA approved BS1362 protected by a 13 A fuse. Our company shall fuse of the same rating must be used.
Page 10
4.2 Preparation 4. Install transportation safety bolts in the reverse order of removal procedure. 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, INFORMATION! color, and degree of soiling and allowable • Never move the product without water temperature.
• Operate the product in the highest The detergent drawer capacity allowed by the programme you have selected, but do not overload; see, is composed of three "Programme and consumption table". See, compartments: “Programme and consumption table" – (1) for prewash • Always follow the instructions on the – (2) for main wash detergent packaging.
Page 12
• Do not use amounts exceeding the dosage going to use the Delayed Start function, do quantities recommended on the detergent not use liquid detergent. package to avoid problems of excessive Using gel and tablet detergent foam, poor rinsing, financial savings and • If the gel detergent thickness is fluidal and finally, environmental protection.
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC)
with intense washing movements. If the • : Selectable quick wash function is not selected, superior * : Automatically selected, no canceling. washing and rinsing performance is ensured ** : Energy Label programme (EN 60456 Ed.3) for your heavily soiled laundry. ***: If maximum spin speed of the machine is •...
Page 16
• Shirts • Programme was tested by “The British Allergy Foundation” (Allergy UK) with the This programme is used to wash the shirts 60°C temperature option selected and made from cotton, synthetic and synthetic it was certified in terms of its efficacy in blended fabrics altogether. It reduces wrinkles. eliminating allergens in addition to bacteria When the quick wash function is selected, the and mould.
4.3.7 Special programmes • StainExpert The machine has a special stain programme For specific applications, select any of the which enables the removal of different types following programmes. of stains in the most effective way. Use this • Rinse programme only for durable colourfast cotton Use when you want to rinse or starch separately.
Rinse hold 4.3.10.1 Auxiliary functions If you are not going to unload your clothes • Prewash immediately after the programme completes, you A Prewash is only worthwhile for heavily soiled can use rinse hold function to keep your laundry laundry. Not using the Prewash will save in the final rinsing water in order to prevent them energy, water, detergent and time.
4.3.11 Delayed Start • Child Lock 3” Use Child Lock function to prevent children With the Delayed Start function the startup of the programme may be delayed up to 19 from tampering with the machine. Thus you can avoid any changes in a running programme. hours. Delayed start time can be increased by increments of 1 hour.
Page 20
4.3.12 Starting the programme 4.3.15 Changing the selections 1. Press Start/Pause button to start the after programme has started programme. Switching the machine to pause mode 2. Programme follow-up light showing the Press the Start / Pause button to switch the startup of the programme will turn on.
4.4 Maintenance and cleaning 4.3.16 Cancelling the programme To cancel the programme, turn the Programme Service life of product extends and frequently Selection knob to select another programme. experienced problems will be reduced if it is Previous programme will be cancelled. End / cleaned at regular intervals.
4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause solid items such as buttons, coins and fabric rust stains in the drum. Clean the fibers clogging the pump impeller during stains on the drum surface by using discharge of washing water.
5 Troubleshooting 3 Follow the below procedures in order to drain water. Program does not start after closing the door. The product has an emergency water draining • Start / Pause / Cancel button was not pressed. >>>*Press hose, in order to drain the water: the Start / Pause / Cancel button.
Page 24
Machine directly discharges the water it takes in. Machine does not switch to spinning step. (*) • Draining hose might not be at adequate height. • There might be unbalanced load in the machine. >>>Connect the water draining hose as described in the >>>Automatic unbalanced load detection system might operation manual.
Page 25
Colour of the clothes faded. (**) • Detergent might be mixed with the softener. >>>Do not mix the softener with detergent. Wash and clean the • Excessive laundry was loaded in. >>>Do not load the machine in excess. dispenser with hot water. •...
Page 26
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
Page 27
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction. This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578.
Page 28
Beko Free standing appliances come with a 12 month parts and labour guarantee as standard, Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is extended to 24 months, free of charge, upon registration of the appliance. When you register your appliance for additional guarantee, you will automatically activate the ProSmart Motor 10 year guarantee.
Page 29
Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.
Need help?
Do you have a question about the WTG941B3W and is the answer not in the manual?
Questions and answers