Do you have a question about the WTG941B1W and is the answer not in the manual?
Questions and answers
Emmett Sheridan
January 17, 2025
The programme starts and the machine fills with water but then it just stops once it is full of water.
1 comments:
Mr. Anderson
February 3, 2025
The Beko WTG941B1W washing machine may stop after filling with water due to the following reasons:
1. Water level reading error (E07): The machine might not correctly detect the water level. 2. Unbalanced load: The automatic unbalanced load detection system may activate if the laundry is unevenly distributed. 3. Foam detection: Excessive foam caused by too much detergent can trigger the foam absorption system and halt the program. 4. Timer delay: The timer may stop during water intake until sufficient water is present or during heating until the desired temperature is reached.
Ensure proper detergent usage, balanced laundry distribution, and that the machine detects water levels correctly.
Need help?
Do you have a question about the WTG941B1W and is the answer not in the manual?
Questions and answers
The programme starts and the machine fills with water but then it just stops once it is full of water.
The Beko WTG941B1W washing machine may stop after filling with water due to the following reasons:
1. Water level reading error (E07): The machine might not correctly detect the water level.
2. Unbalanced load: The automatic unbalanced load detection system may activate if the laundry is unevenly distributed.
3. Foam detection: Excessive foam caused by too much detergent can trigger the foam absorption system and halt the program.
4. Timer delay: The timer may stop during water intake until sufficient water is present or during heating until the desired temperature is reached.
Ensure proper detergent usage, balanced laundry distribution, and that the machine detects water levels correctly.
This answer is automatically generated