LG W2442PA User Manual page 19

On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
SETUP
RGB
RGB/DVI input
RGB
HDMI input
HDMI
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only
when the input signal is an analog signal.
Sub menu
To choose the language in which the
LANGUAGE
control names are displayed.
OSD To adjust position of the OSD window
POSITION
on the screen.
If the output of the video card is different
WHITE
BALANCE
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for RGB/DVI input)
OVERSCAN To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
Use this function to set the power
POWER
indicator on the front side of the monitor
INDICATOR
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY Restore all factory default settings except
"LANGUAGE."
RESET
Press the
A18
Description
, buttons to reset immediately.